> For the complete documentation index, see [llms.txt](https://docs.greennode.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.greennode.ai/vserver/vmarketplace/network-software-installation/pfsense-on-hcm03/notice-and-limitation.md).

# Notice & Limitation

### Default MTU

The default MTU of Pfsense is 1500. You need to adjust this parameter to match the GreenNode configuration of 1450.

**Step 1: Access the pfSense management interface, select the "Interfaces" tab, and configure the WAN (or LAN in use) network one by one.**

<figure><img src="/files/CCOt6XBXUF9hnHXm4czG" alt=""><figcaption></figcaption></figure>

**Step 2: In the MTU section, enter the value 1450.**

Finally, click "Save" to save the configuration.

Repeat these steps for all Interfaces in use.

If you encounter any difficulties during the process, please contact GreenNode support.